From 56f544af4013fab6d6b279289d61a29ae1e9f6f6 Mon Sep 17 00:00:00 2001
From: Rob Austein <sra@hactrn.net>
Date: Fri, 28 Jan 2011 16:15:09 +0000
Subject: Autoconf installation script for rcynic on Linux, because at least
 one required program (awk) lives in different places in different distros.

rcynic installation parameters probably ought to be configurable via
autoconf too, but don't worry about that for now.

svn path=/configure; revision=3671
---
 rcynic/installation-scripts/linux/install.sh    | 209 -----------------------
 rcynic/installation-scripts/linux/install.sh.in | 211 ++++++++++++++++++++++++
 2 files changed, 211 insertions(+), 209 deletions(-)
 delete mode 100644 rcynic/installation-scripts/linux/install.sh
 create mode 100644 rcynic/installation-scripts/linux/install.sh.in

(limited to 'rcynic/installation-scripts/linux')

diff --git a/rcynic/installation-scripts/linux/install.sh b/rcynic/installation-scripts/linux/install.sh
deleted file mode 100644
index 38ce9a9d..00000000
--- a/rcynic/installation-scripts/linux/install.sh
+++ /dev/null
@@ -1,209 +0,0 @@
-#!/bin/sh -
-# $Id$
-#
-# Create a chroot jail for rcynic.
-#
-# This is approximately what a package installation script might do.
-
-: ${jaildir="/var/rcynic"}
-: ${jailuser="rcynic"}
-: ${jailgroup="rcynic"}
-: ${setupcron="YES"}
-
-echo "Setting up \"${jaildir}\" as a chroot jail for rcynic."
-
-if /bin/awk -F: -v jailgroup="${jailgroup}" 'BEGIN {status = 1} $1 == jailgroup {status = 0} END {exit status}' /etc/group
-then
-    echo "You already have a group \"${jailgroup}\", so I will use it."
-elif /usr/sbin/groupadd ${jailgroup}
-then
-    echo "Added group \"${jailgroup}\"."
-else
-    echo "Adding group \"${jailgroup}\" failed..."
-    echo "Please create it, then try again."
-    exit 1
-fi
-
-if /bin/awk -F: -v jailuser="${jailuser}" 'BEGIN {status = 1} $1 == jailuser {status = 0} END {exit status}' /etc/passwd
-then
-    echo "You already have a user \"${jailuser}\", so I will use it."
-elif /usr/sbin/useradd -g ${jailgroup} -M -N -d "${jaildir}" -s /sbin/nologin -c "RPKI validation system" ${jailuser}
-then
-    echo "Added user \"${jailuser}\"."
-else
-    echo "Adding user \"${jailuser}\" failed..."
-    echo "Please create it, then try again."
-    exit 1
-fi
-
-echo "Building directories"
-
-if ! /bin/mkdir -p -v -m 555		\
-    "${jaildir}/bin"			\
-    "${jaildir}/dev"			\
-    "${jaildir}/etc/trust-anchors"	\
-    "${jaildir}/lib"			\
-    "${jaildir}/usr/lib"		\
-    "${jaildir}/data"
-then
-    echo "Unable to build directories under \"${jaildir}\", please fix this then try again."
-    exit 1
-fi
-
-echo "Installing device inodes"
-
-if ! (cd /dev; /bin/ls null zero random urandom | /bin/cpio -puv "${jaildir}/dev")
-then
-    echo "Unable to install device inodes in ${jaildir}/dev/, please fix this then try again"
-    exit 1
-fi
-
-echo "Copying files from /etc"
-
-for i in /etc/localtime /etc/resolv.conf /etc/passwd /etc/group
-do
-    j="${jaildir}${i}"
-    if test -r "$i" &&
-	! /usr/bin/cmp -s "$i" "$j" &&
-	! /bin/cp -p "$i" "$j"
-    then
-	echo "Unable to copy $i to ${jaildir}, please fix this then try again"
-	exit 1
-    fi
-done
-
-echo "Whacking file permissions"
-
-if ! /bin/chmod -R a-w "${jaildir}/bin" "${jaildir}/etc" ||
-   ! /bin/chmod -R 755 "${jaildir}/data" ||
-   ! /bin/chown -R root:root "${jaildir}/bin" "${jaildir}/etc" ||
-   ! /bin/chown -R "${jailuser}:${jailgroup}" "${jaildir}/data"
-then
-    echo "Unable to set file permissions and ownerships correctly, please fix this and try again"
-    exit 1
-fi
-
-if test -r "$jaildir/etc/rcynic.conf"; then
-    echo "You already have config file \"${jaildir}/etc/rcynic.conf\", so I will use it."
-elif /usr/bin/install -m 444 -o root -g root -p ../sample-rcynic.conf "${jaildir}/etc/rcynic.conf"; then
-    echo "Installed minimal ${jaildir}/etc/rcynic.conf, adding SAMPLE trust anchors"
-    for i in ../../sample-trust-anchors/*.tal; do
-	j="$jaildir/etc/trust-anchors/${i##*/}"
-	test -r "$i" || continue
-	test -r "$j" && continue
-	echo "Installing $i as $j"
-	/usr/bin/install -m 444 -o root -g root -p "$i" "$j"
-    done
-    j=1
-    for i in $jaildir/etc/trust-anchors/*.tal; do
-	echo >>"${jaildir}/etc/rcynic.conf" "trust-anchor-locator.$j	= /etc/trust-anchors/${i##*/}"
-	j=$((j+1))
-    done
-else
-    echo "Installing minimal ${jaildir}/etc/rcynic.conf failed"
-    exit 1
-fi
-
-echo "Installing rcynic as ${jaildir}/bin/rcynic"
-
-/usr/bin/install -m 555 -o root -g root -p ../../rcynic "${jaildir}/bin/rcynic"
-
-if test -x "$jaildir/bin/rsync"; then
-    echo "You already have an executable \"$jaildir/bin/rsync\", so I will use it"
-elif /usr/bin/install -m 555 -o root -g root -p /usr/bin/rsync "${jaildir}/bin/rsync"; then
-    echo "Installed ${jaildir}/bin/rsync"
-else
-    echo "Installing ${jaildir}/bin/rsync failed"
-    exit 1
-fi
-
-echo "Copying required shared libraries" 
-
-shared_libraries="${jaildir}/bin/rcynic ${jaildir}/bin/rsync"
-while true
-do
-    closure="$(/usr/bin/ldd ${shared_libraries} |
-	       /bin/awk -v "rcynic=${jaildir}/bin/rcynic" -v "rsync=${jaildir}/bin/rsync" \
-		   '{sub(/:$/, "")} $0 == rcynic || $0 == rsync {next} {for (i = 1; i <= NF; i++) if ($i ~ /^\//) print $i}' |
-	       /bin/sort -u)"
-    if test "x$shared_libraries" = "x$closure"
-    then
-	break
-    else
-	shared_libraries="$closure"
-    fi
-done
-
-for shared in /lib/ld*.so $shared_libraries /lib/libnss*.so.*
-do
-    if test -r "${jaildir}/${shared}"
-    then
-	echo "You already have a \"${jaildir}${shared}\", so I will use it"
-    elif /usr/bin/install -m 555 -o root -g root -p "${shared}" "${jaildir}${shared}"
-    then
-	echo "Copied ${shared} into ${jaildir}"
-    else
-        echo "Unable to copy ${shared} into ${jaildir}"
-	exit 1
-    fi
-done
-
-if /usr/bin/install -m 444 -o root -g root -p ../../rcynic.xsl "${jaildir}/etc/rcynic.xsl"; then
-    echo "Installed rcynic.xsl as \"${jaildir}/etc/rcynic.xsl\""
-else
-    echo "Installing rcynic.xsl failed"
-    exit 1
-fi
-
-echo "Setting up root's crontab to run jailed rcynic"
-
-case "$setupcron" in
-YES|yes)
-    /usr/bin/crontab -l -u root 2>/dev/null |
-    /bin/awk -v "jailuser=$jailuser" -v "jailgroup=$jailgroup" -v "jaildir=$jaildir" '
-	BEGIN {
-	    cmd = "exec /usr/sbin/chroot --userspec=" jailuser ":" jailgroup " " jaildir;
-	    cmd = cmd " /bin/rcynic -c /etc/rcynic.conf";
-	}
-	$0 !~ cmd {
-	    print;
-	}
-	END {
-	    "/usr/bin/hexdump -n 2 -e \"\\\"%u\\\\\\n\\\"\" /dev/random" | getline;
-	    printf "%u * * * *\t%s\n", $1 % 60, cmd;
-	}' |
-    /usr/bin/crontab -u root -
-    /bin/cat <<EOF
-
-	crontab is set up to run rcynic hourly, at a randomly selected
-	minute (to spread load on the rsync servers).  Please do NOT
-	adjust this to run on the hour.  In particular please do NOT
-	adjust this to run at midnight UTC.
-EOF
-    ;;
-
-*)
-    /bin/cat <<EOF
-
-	You'll need to add a crontab entry running the following command as root:
-
-	    /usr/sbin/chroot -u $jailuser -g $jailgroup $jaildir /bin/rcynic -c /etc/rcynic.conf
-
-	Please try to pick a random time for this, don't just run it on the hour,
-	or at local midnight, or, worst of all, at midnight UTC.
-
-EOF
-    ;;
-
-esac
-
-/bin/cat <<EOF
-
-	Jail set up. You may need to customize $jaildir/etc/rcynic.conf.
-	If you did not install your own trust anchors, a default set
-	of SAMPLE trust anchors may have been installed for you, but
-	you, the relying party, are the only one who can decide
-	whether you trust those anchors.  rcynic will not do anything
-	useful without good trust anchors.
-
-EOF
diff --git a/rcynic/installation-scripts/linux/install.sh.in b/rcynic/installation-scripts/linux/install.sh.in
new file mode 100644
index 00000000..da1838c5
--- /dev/null
+++ b/rcynic/installation-scripts/linux/install.sh.in
@@ -0,0 +1,211 @@
+#!/bin/sh -
+# $Id$
+#
+# Create a chroot jail for rcynic.
+#
+# This is approximately what a package installation script might do.
+
+: ${jaildir="/var/rcynic"}
+: ${jailuser="rcynic"}
+: ${jailgroup="rcynic"}
+: ${setupcron="YES"}
+
+AWK='@AWK@'
+
+echo "Setting up \"${jaildir}\" as a chroot jail for rcynic."
+
+if ${AWK} -F: -v jailgroup="${jailgroup}" 'BEGIN {status = 1} $1 == jailgroup {status = 0} END {exit status}' /etc/group
+then
+    echo "You already have a group \"${jailgroup}\", so I will use it."
+elif /usr/sbin/groupadd ${jailgroup}
+then
+    echo "Added group \"${jailgroup}\"."
+else
+    echo "Adding group \"${jailgroup}\" failed..."
+    echo "Please create it, then try again."
+    exit 1
+fi
+
+if ${AWK} -F: -v jailuser="${jailuser}" 'BEGIN {status = 1} $1 == jailuser {status = 0} END {exit status}' /etc/passwd
+then
+    echo "You already have a user \"${jailuser}\", so I will use it."
+elif /usr/sbin/useradd -g ${jailgroup} -M -N -d "${jaildir}" -s /sbin/nologin -c "RPKI validation system" ${jailuser}
+then
+    echo "Added user \"${jailuser}\"."
+else
+    echo "Adding user \"${jailuser}\" failed..."
+    echo "Please create it, then try again."
+    exit 1
+fi
+
+echo "Building directories"
+
+if ! /bin/mkdir -p -v -m 555		\
+    "${jaildir}/bin"			\
+    "${jaildir}/dev"			\
+    "${jaildir}/etc/trust-anchors"	\
+    "${jaildir}/lib"			\
+    "${jaildir}/usr/lib"		\
+    "${jaildir}/data"
+then
+    echo "Unable to build directories under \"${jaildir}\", please fix this then try again."
+    exit 1
+fi
+
+echo "Installing device inodes"
+
+if ! (cd /dev; /bin/ls null zero random urandom | /bin/cpio -puv "${jaildir}/dev")
+then
+    echo "Unable to install device inodes in ${jaildir}/dev/, please fix this then try again"
+    exit 1
+fi
+
+echo "Copying files from /etc"
+
+for i in /etc/localtime /etc/resolv.conf /etc/passwd /etc/group
+do
+    j="${jaildir}${i}"
+    if test -r "$i" &&
+	! /usr/bin/cmp -s "$i" "$j" &&
+	! /bin/cp -p "$i" "$j"
+    then
+	echo "Unable to copy $i to ${jaildir}, please fix this then try again"
+	exit 1
+    fi
+done
+
+echo "Whacking file permissions"
+
+if ! /bin/chmod -R a-w "${jaildir}/bin" "${jaildir}/etc" ||
+   ! /bin/chmod -R 755 "${jaildir}/data" ||
+   ! /bin/chown -R root:root "${jaildir}/bin" "${jaildir}/etc" ||
+   ! /bin/chown -R "${jailuser}:${jailgroup}" "${jaildir}/data"
+then
+    echo "Unable to set file permissions and ownerships correctly, please fix this and try again"
+    exit 1
+fi
+
+if test -r "$jaildir/etc/rcynic.conf"; then
+    echo "You already have config file \"${jaildir}/etc/rcynic.conf\", so I will use it."
+elif /usr/bin/install -m 444 -o root -g root -p ../sample-rcynic.conf "${jaildir}/etc/rcynic.conf"; then
+    echo "Installed minimal ${jaildir}/etc/rcynic.conf, adding SAMPLE trust anchors"
+    for i in ../../sample-trust-anchors/*.tal; do
+	j="$jaildir/etc/trust-anchors/${i##*/}"
+	test -r "$i" || continue
+	test -r "$j" && continue
+	echo "Installing $i as $j"
+	/usr/bin/install -m 444 -o root -g root -p "$i" "$j"
+    done
+    j=1
+    for i in $jaildir/etc/trust-anchors/*.tal; do
+	echo >>"${jaildir}/etc/rcynic.conf" "trust-anchor-locator.$j	= /etc/trust-anchors/${i##*/}"
+	j=$((j+1))
+    done
+else
+    echo "Installing minimal ${jaildir}/etc/rcynic.conf failed"
+    exit 1
+fi
+
+echo "Installing rcynic as ${jaildir}/bin/rcynic"
+
+/usr/bin/install -m 555 -o root -g root -p ../../rcynic "${jaildir}/bin/rcynic"
+
+if test -x "$jaildir/bin/rsync"; then
+    echo "You already have an executable \"$jaildir/bin/rsync\", so I will use it"
+elif /usr/bin/install -m 555 -o root -g root -p /usr/bin/rsync "${jaildir}/bin/rsync"; then
+    echo "Installed ${jaildir}/bin/rsync"
+else
+    echo "Installing ${jaildir}/bin/rsync failed"
+    exit 1
+fi
+
+echo "Copying required shared libraries" 
+
+shared_libraries="${jaildir}/bin/rcynic ${jaildir}/bin/rsync"
+while true
+do
+    closure="$(/usr/bin/ldd ${shared_libraries} |
+	       ${AWK} -v "rcynic=${jaildir}/bin/rcynic" -v "rsync=${jaildir}/bin/rsync" \
+		   '{sub(/:$/, "")} $0 == rcynic || $0 == rsync {next} {for (i = 1; i <= NF; i++) if ($i ~ /^\//) print $i}' |
+	       /bin/sort -u)"
+    if test "x$shared_libraries" = "x$closure"
+    then
+	break
+    else
+	shared_libraries="$closure"
+    fi
+done
+
+for shared in /lib/ld*.so $shared_libraries /lib/libnss*.so.*
+do
+    if test -r "${jaildir}/${shared}"
+    then
+	echo "You already have a \"${jaildir}${shared}\", so I will use it"
+    elif /usr/bin/install -m 555 -o root -g root -p "${shared}" "${jaildir}${shared}"
+    then
+	echo "Copied ${shared} into ${jaildir}"
+    else
+        echo "Unable to copy ${shared} into ${jaildir}"
+	exit 1
+    fi
+done
+
+if /usr/bin/install -m 444 -o root -g root -p ../../rcynic.xsl "${jaildir}/etc/rcynic.xsl"; then
+    echo "Installed rcynic.xsl as \"${jaildir}/etc/rcynic.xsl\""
+else
+    echo "Installing rcynic.xsl failed"
+    exit 1
+fi
+
+echo "Setting up root's crontab to run jailed rcynic"
+
+case "$setupcron" in
+YES|yes)
+    /usr/bin/crontab -l -u root 2>/dev/null |
+    ${AWK} -v "jailuser=$jailuser" -v "jailgroup=$jailgroup" -v "jaildir=$jaildir" '
+	BEGIN {
+	    cmd = "exec /usr/sbin/chroot --userspec=" jailuser ":" jailgroup " " jaildir;
+	    cmd = cmd " /bin/rcynic -c /etc/rcynic.conf";
+	}
+	$0 !~ cmd {
+	    print;
+	}
+	END {
+	    "/usr/bin/hexdump -n 2 -e \"\\\"%u\\\\\\n\\\"\" /dev/random" | getline;
+	    printf "%u * * * *\t%s\n", $1 % 60, cmd;
+	}' |
+    /usr/bin/crontab -u root -
+    /bin/cat <<EOF
+
+	crontab is set up to run rcynic hourly, at a randomly selected
+	minute (to spread load on the rsync servers).  Please do NOT
+	adjust this to run on the hour.  In particular please do NOT
+	adjust this to run at midnight UTC.
+EOF
+    ;;
+
+*)
+    /bin/cat <<EOF
+
+	You'll need to add a crontab entry running the following command as root:
+
+	    /usr/sbin/chroot -u $jailuser -g $jailgroup $jaildir /bin/rcynic -c /etc/rcynic.conf
+
+	Please try to pick a random time for this, don't just run it on the hour,
+	or at local midnight, or, worst of all, at midnight UTC.
+
+EOF
+    ;;
+
+esac
+
+/bin/cat <<EOF
+
+	Jail set up. You may need to customize $jaildir/etc/rcynic.conf.
+	If you did not install your own trust anchors, a default set
+	of SAMPLE trust anchors may have been installed for you, but
+	you, the relying party, are the only one who can decide
+	whether you trust those anchors.  rcynic will not do anything
+	useful without good trust anchors.
+
+EOF
-- 
cgit v1.2.3