[[PageOutline]]

[[TracNav(doc/RPKI/TOC)]]

= Download and Installation =

There are a few different ways to install the RPKI code, depending on
what the platform on which you're trying to install.

* On Ubuntu 12.04 LTS ("Precise Pangolin"), Ubuntu 14.04 ("Trusty Tahir"), or Debian 7 ("Wheezy"), you can use [wiki:doc/RPKI/Installation/DebianPackages Debian binary packages].

== Simple RPKI Cacha Install ==

if you want to install a simple RPKI cache to feed routers from a Ubuntu 14.04 system, [wiki:doc/RPKI/Installation/UbuntuRP here is a one page ten minute recipe].

== install a CA and a cache on a Ubuntu 14.04 with a rootd CA ==

If you want to install a CA and a cache on a Ubuntu 14.04 with a rootd CA, [wiki:doc/RPKI/Installation/UbuntuRootd here is a one page hack].  It will take less than an hour.

== Try the rrdp testbed CA and RP on Ubuntu Xenial ==

If you are feeling adventurous and want to try the rrdp testbed CA and RP on Ubuntu Xenial 16.04 [wiki:RRDPtestbed here is a one page hack.]  It supports a much simpler root CA.

== FreeBSD ==

On FreeBSD, you can use [wiki:doc/RPKI/Installation/FreeBSDPorts FreeBSD ports].

== Other Platforms ==

On all other platforms, or on the above platforms if the
pre-packaged versions don't suit your needs, you will have to
[wiki:doc/RPKI/Installation/FromSource install from source code].

Once you've finished installing the code, you will need to configure
it.  Since CAs are generally also relying parties (if only so that
they can check the results of their own actions), you will generally
want to start by configuring the [[RP|relying party tools]], then
configure the [[CA|CA tools]] if you're planning to use them.