Fork rcynic so I can start hacking it for parallel rsync

svn path=/configure; revision=3816

1 files changed, 236 insertions, 0 deletions

diff --git a/rcynic-ng/installation-scripts/linux/install.sh.in b/rcynic-ng/installation-scripts/linux/install.sh.in
new file mode 100644
index 00000000..f0bdc505
--- /dev/null
+++ b/rcynic-ng/installation-scripts/linux/install.sh.in
@@ -0,0 +1,236 @@
+#!/bin/sh -
+# $Id$
+#
+# Create a chroot jail for rcynic.
+#
+# This is approximately what a package installation script might do.
+
+: ${jaildir="${DESTDIR}/var/rcynic"}
+: ${jailuser="rcynic"}
+: ${jailgroup="rcynic"}
+: ${setupcron="YES"}
+
+AWK='@AWK@'
+SORT='@SORT@'
+
+echo "Setting up \"${jaildir}\" as a chroot jail for rcynic."
+
+if ${AWK} -F: -v jailgroup="${jailgroup}" 'BEGIN {status = 1} $1 == jailgroup {status = 0} END {exit status}' /etc/group
+then
+    echo "You already have a group \"${jailgroup}\", so I will use it."
+elif /usr/sbin/groupadd ${jailgroup}
+then
+    echo "Added group \"${jailgroup}\"."
+else
+    echo "Adding group \"${jailgroup}\" failed..."
+    echo "Please create it, then try again."
+    exit 1
+fi
+
+# The adduser program on CentOS 5.x uses the -n flag instead of -N to
+# avoid creating the associated group.
+nogroup='-N'
+if test -f /etc/redhat-release; then
+	read vendor release version < /etc/redhat-release 
+	if test $vendor = CentOS; then
+		nogroup='-n'
+	fi
+fi
+
+if ${AWK} -F: -v jailuser="${jailuser}" 'BEGIN {status = 1} $1 == jailuser {status = 0} END {exit status}' /etc/passwd
+then
+    echo "You already have a user \"${jailuser}\", so I will use it."
+elif /usr/sbin/useradd -g ${jailgroup} -M $nogroup -d "${jaildir}" -s /sbin/nologin -c "RPKI validation system" ${jailuser}
+then
+    echo "Added user \"${jailuser}\"."
+else
+    echo "Adding user \"${jailuser}\" failed..."
+    echo "Please create it, then try again."
+    exit 1
+fi
+
+# test for x86_64 target
+if test -d /lib64; then
+    libdir=/lib64
+else
+    libdir=/lib
+fi
+    
+echo "Building directories"
+
+if ! /bin/mkdir -p -v -m 555		\
+    "${jaildir}/bin"			\
+    "${jaildir}/dev"			\
+    "${jaildir}/etc/trust-anchors"	\
+    "${jaildir}/${libdir}"			\
+    "${jaildir}/usr/lib"		\
+    "${jaildir}/data"
+then
+    echo "Unable to build directories under \"${jaildir}\", please fix this then try again."
+    exit 1
+fi
+
+echo "Installing device inodes"
+
+if ! (cd /dev; /bin/ls null zero random urandom | /bin/cpio -puv "${jaildir}/dev")
+then
+    echo "Unable to install device inodes in ${jaildir}/dev/, please fix this then try again"
+    exit 1
+fi
+
+echo "Copying files from /etc"
+
+for i in /etc/localtime /etc/resolv.conf /etc/passwd /etc/group
+do
+    j="${jaildir}${i}"
+    if test -r "$i" &&
+	! /usr/bin/cmp -s "$i" "$j" &&
+	! /bin/cp -p "$i" "$j"
+    then
+	echo "Unable to copy $i to ${jaildir}, please fix this then try again"
+	exit 1
+    fi
+done
+
+echo "Whacking file permissions"
+
+if ! /bin/chmod -R a-w "${jaildir}/bin" "${jaildir}/etc" ||
+   ! /bin/chmod -R 755 "${jaildir}/data" ||
+   ! /bin/chown -R root:root "${jaildir}/bin" "${jaildir}/etc" ||
+   ! /bin/chown -R "${jailuser}:${jailgroup}" "${jaildir}/data"
+then
+    echo "Unable to set file permissions and ownerships correctly, please fix this and try again"
+    exit 1
+fi
+
+if test -r "$jaildir/etc/rcynic.conf"; then
+    echo "You already have config file \"${jaildir}/etc/rcynic.conf\", so I will use it."
+elif /usr/bin/install -m 444 -o root -g root -p ../sample-rcynic.conf "${jaildir}/etc/rcynic.conf"; then
+    echo "Installed minimal ${jaildir}/etc/rcynic.conf, adding SAMPLE trust anchors"
+    for i in ../../sample-trust-anchors/*.tal; do
+	j="$jaildir/etc/trust-anchors/${i##*/}"
+	test -r "$i" || continue
+	test -r "$j" && continue
+	echo "Installing $i as $j"
+	/usr/bin/install -m 444 -o root -g root -p "$i" "$j"
+    done
+    j=1
+    for i in $jaildir/etc/trust-anchors/*.tal; do
+	echo >>"${jaildir}/etc/rcynic.conf" "trust-anchor-locator.$j	= /etc/trust-anchors/${i##*/}"
+	j=$((j+1))
+    done
+else
+    echo "Installing minimal ${jaildir}/etc/rcynic.conf failed"
+    exit 1
+fi
+
+echo "Installing rcynic as ${jaildir}/bin/rcynic"
+
+/usr/bin/install -m 555 -o root -g root -p ../../rcynic "${jaildir}/bin/rcynic"
+
+if test -x "$jaildir/bin/rsync"; then
+    echo "You already have an executable \"$jaildir/bin/rsync\", so I will use it"
+elif /usr/bin/install -m 555 -o root -g root -p /usr/bin/rsync "${jaildir}/bin/rsync"; then
+    echo "Installed ${jaildir}/bin/rsync"
+else
+    echo "Installing ${jaildir}/bin/rsync failed"
+    exit 1
+fi
+
+echo "Copying required shared libraries" 
+
+shared_libraries="${jaildir}/bin/rcynic ${jaildir}/bin/rsync"
+while true
+do
+    closure="$(/usr/bin/ldd ${shared_libraries} |
+	       ${AWK} -v "rcynic=${jaildir}/bin/rcynic" -v "rsync=${jaildir}/bin/rsync" \
+		   '{sub(/:$/, "")} $0 == rcynic || $0 == rsync {next} {for (i = 1; i <= NF; i++) if ($i ~ /^\//) print $i}' |
+	       ${SORT} -u)"
+    if test "x$shared_libraries" = "x$closure"
+    then
+	break
+    else
+	shared_libraries="$closure"
+    fi
+done
+
+# Under CentOS 5.5, rsync requires libresolv, but ldd doesn't show
+# it.
+if test -f ${libdir}/libresolv.so.2; then
+    shared_libraries="${shared_libraries} ${libdir}/libresolv.so.2"
+fi
+
+for shared in ${libdir}/ld*.so $shared_libraries ${libdir}/libnss*.so.*
+do
+    if test -r "${jaildir}/${shared}"
+    then
+	echo "You already have a \"${jaildir}${shared}\", so I will use it"
+    elif /usr/bin/install -m 555 -o root -g root -d "${jaildir}${shared%/*}" &&
+	 /usr/bin/install -m 555 -o root -g root -p "${shared}" "${jaildir}${shared}"
+    then
+	echo "Copied ${shared} into ${jaildir}"
+    else
+        echo "Unable to copy ${shared} into ${jaildir}"
+	exit 1
+    fi
+done
+
+if /usr/bin/install -m 444 -o root -g root -p ../../rcynic.xsl "${jaildir}/etc/rcynic.xsl"; then
+    echo "Installed rcynic.xsl as \"${jaildir}/etc/rcynic.xsl\""
+else
+    echo "Installing rcynic.xsl failed"
+    exit 1
+fi
+
+echo "Setting up root's crontab to run jailed rcynic"
+
+case "$setupcron" in
+YES|yes)
+    /usr/bin/crontab -l -u root 2>/dev/null |
+    ${AWK} -v "jailuser=$jailuser" -v "jailgroup=$jailgroup" -v "jaildir=$jaildir" '
+	BEGIN {
+	    cmd = "exec /usr/sbin/chroot --userspec=" jailuser ":" jailgroup " " jaildir;
+	    cmd = cmd " /bin/rcynic -c /etc/rcynic.conf";
+	}
+	$0 !~ cmd {
+	    print;
+	}
+	END {
+	    "/usr/bin/hexdump -n 2 -e \"\\\"%u\\\\\\n\\\"\" /dev/random" | getline;
+	    printf "%u * * * *\t%s\n", $1 % 60, cmd;
+	}' |
+    /usr/bin/crontab -u root -
+    /bin/cat <<EOF
+
+	crontab is set up to run rcynic hourly, at a randomly selected
+	minute (to spread load on the rsync servers).  Please do NOT
+	adjust this to run on the hour.  In particular please do NOT
+	adjust this to run at midnight UTC.
+EOF
+    ;;
+
+*)
+    /bin/cat <<EOF
+
+	You'll need to add a crontab entry running the following command as root:
+
+	    /usr/sbin/chroot -u $jailuser -g $jailgroup $jaildir /bin/rcynic -c /etc/rcynic.conf
+
+	Please try to pick a random time for this, don't just run it on the hour,
+	or at local midnight, or, worst of all, at midnight UTC.
+
+EOF
+    ;;
+
+esac
+
+/bin/cat <<EOF
+
+	Jail set up. You may need to customize $jaildir/etc/rcynic.conf.
+	If you did not install your own trust anchors, a default set
+	of SAMPLE trust anchors may have been installed for you, but
+	you, the relying party, are the only one who can decide
+	whether you trust those anchors.  rcynic will not do anything
+	useful without good trust anchors.
+
+EOF